D2 Tool Die Steel Cold-Work Flat Bar

D2 Tool Die Steel Cold-Work Flat Bar cold rolled steel d2 die steel MOQ: 1 ton Stable quality

D2 Tool Die Steel Cold-Work Flat Barcold rolled steeld2 die steelMOQ: 1 tonStable quality

 

Chemical composition

Country	Steel NO.	C	Si	Mn	Cr	Mo	V	P	S	Other
China GB	Cr12Mo1V1	1.40-1.60	≤0.060	≤0.60	11.0-13.0	0.70-1.20	≤1.10	≤0.030	≤0.030	Co≤1.00
USA AISI	D2	1.40-1.60	0.30-0.50	0.30-0.50	11.0-13.0	0.70-1.20	(0.80)	≤0.025	≤0.025	Co:0.60
Japan JIS	SKD11	1.40-1.60	≤0.40	≤0.60	11.0-13.0	0.80-1.20	0.20-0.5	—	—	Ni:0.50
Germany	1.2379	1.50-1.60	0.10-0.40	0.15-0.45	11.50-12.50	0.60-0.80	0.90-1.10	≤0.030	≤0.030	—
France	X160CrMoV12	1.45-1.70	0.10-0.40	0.15-0.45	11.0-13.0	0.70-1.10	1.00	—	—	—

 

Size

Round bar	Diameter (mm)	Length (mm)
	50~500	2000~5800
plate/sheet	Thickness(mm)	Width(mm)	Length (mm)
	20~400	80~1000	2000~5800

 

Pre-heat treatment1.Ingot and billet tempering technology: heat temperature870-890°c, keep temperature 2-4H, furnace cold below, out and air cold.2.Steel is thermal technology: heat temperature 840-860°c, keep temperature 2H, furnace to 720-740°c, keep 4H, furnace cold below 550°c, out and air cold, tempering hardness 207-255HBS.

 

Characteristic:1. High harden ability, hardened, high wear resistance.2. High-temperature oxidation resistance is good, and after quenching and polishing corrosion resistance is excellent, small deformation after heat treatment. Application:Suitable for impact and extrusion molds of high output, thread twisting molds, molds for ceramics, molds for electric circuit plates and plastic molds of high output.

Physical properties:

Critical temperature

Critical point	Ac1	Acm	Arcm	Ar1	Ms
Temperature(Approximation)/°c	810	875	750	695	190

 

 

Coefficient of expansion

Temperature/°c	20~100	20 ~200	20~300	20~400
Coefficient ofexpansion/°c-1	10.5*10-6	11.5*10-6	11.9*10-6	12.2*10-6

D2 Tool Die Steel Cold-Work Flat Bar